Designed to trap and contain greases and oils from aqueous solution as fluid percolates through the filter medium.  Intended for use in a continuous waste-minimizing program, not as a remedy for a badly contaminated system.  Depending on the usage of the parts washer and materials filtered, the bag can often be drained dry and disposed of as a RCRA non-hazardous waste.

• For use with Aqueous Parts Washers
• Selectively removes 1/2 to 1-1/2 quarts motor oil (depending on oil type) from dirty solvent
• Can be used nightly to cleanse solvent and keep it working longer
• Carton contains 2 filter bags
• Check with federal, state and local agencies for proper filter disposal procedures in your area
• NOT FOR USE WITH SOLVENT PARTS WASHERS

Cleaning solution flows through tubing attached to flow-through brush.

• Attaches to flex spout
• 26" flexible rubber tubing

Designed to trap and contain particulate matter. Limited amounts of greases and oils are removed from solvent as fluid percolates through the filter medium. Intended for use in a continuous waste-minimizing program, not as a remedy for a badly contaminated system. Depending on the usage of the parts washer and materials filtered, the bag can often be drained dry and disposed of as a RCRA non-hazardous waste.

• Selectively removes 1/2 to 1-1/2 quarts motor oil (depending on oil type) from dirty solvent
• Contains the same amount of filter media as the Dyna Reclaim Element
• Can be used nightly to cleanse solvent and keep it working longer
• Carton contains 2 filter bags
• Check with federal, state and local agencies for proper filter disposal procedures in your area
• NOT FOR USE WITH AQUEOUS PARTS WASHERS

Metal cover designed to conceal and protect a Dyna-Trap Bag when used in the Dyna-Clean Parts Washing System.

• Protects bag from accidental punctures
• Cover can also be used as a platform to drain small parts
• Painted steel

110 volt, 8 foot, 3-wire cord parts washer light with black Valox shade. Fits all Dyna-Clean and Dyna-Brute Parts Washers.

• 100 watt capacity
• Recessed toggle switch
• Finned aluminum heat sink dissipates heat
• Thermoplastic cool shade that swivels
• Anodized reflector
• Bracket enclosed

An exact replacement for Dyna Clean Filter Pad. For use with the new Dyna-Clean System.

• 400 micron filter pad
• Hogs hair pad sits beneath the Dyna-Clean work platform
• 22" X 18.25

Hogs hair filter pad that fits in the bottom of the Super-Brute soak tank.

• Traps heavy particles and sludge that settle during the parts cleaning process
• 42.75 X 23.5

Hogs hair filter pad that fits in the bottom of the Dyna-Brute soak tank.

• Traps heavy particles and sludge that settle during the parts cleaning process
• 34.25 X 23.5

This blue polypropylene plastic bowl must be substituted for the clear bowl when using aqueous degreasers in the Dyna SST parts washer or adjustable Brake Buggy.

• For the Model 5100 Filtration System
• Also appropriate replacement bowl for filters used on the Dyna Green parts washer

For use with Dyna-Clean Parts Washer.

• Painted steel

Box of 2 replacement filters for any Zep Parts Washer using Zep filtration system. To install, simply unscrew the bowl from Dyna-Clean System. Remove the spent element. Place the new element into the bowl. Replace the “O” Ring seal with new “O” Ring provided with cartridge. Screw bowl back into position.

• String wound, spun-polypropylene filter
• 9-3/4” long, 2-3/4” in diameter
• Each element individually wrapped and packaged 2 per carton
• 100 Micron Filter

Box of 2 replacement filters for the Zep filter system. To install, simply unscrew the bowl from the Zep filter system and remove the spent element then place the new element into the bowl. Replace the “O” Ring seal with new “O” Ring provided with cartridge. Screw bowl back into position.

• Filter medium: string wound, spun-polypropylene
• 9-3/4” long, 2-3/4” in diameter
• Each element individually wrapped and packaged 2 per carton
• 50 Micron Filter

Box of 2 replacement filters for the filters Dyna-Clean Filtration System. To install, simply unscrew the bowl from Dyna-Clean System. Remove the spent element. Place new element into the bowl. Replace the “O” Ring seal with new “O” Ring provided with cartridge. Screw bowl back into position.

• Filter medium: string wound, spun-polypropylene
• 9-3/4” long, 2-3/4” in diameter
• Each element individually wrapped and packaged 2 per carton
• 10 Micron Filter